Init fork from Stuart Robinson's repo

examples/SX128x_examples/Basics/14_LoRa_Structure_TX/Settings.h

@@ -0,0 +1,30 @@
+/*******************************************************************************************************
+  Programs for Arduino - Copyright of the author Stuart Robinson - 08/02/20
+
+  This program is supplied as is, it is up to the user of the program to decide if the program is
+  suitable for the intended purpose and free from errors.
+*******************************************************************************************************/
+
+//*******  Setup hardware pin definitions here ! ***************
+
+//These are the pin definitions for one of my own boards, the Easy Pro Mini,
+//be sure to change the definitions to match your own setup.
+
+#define NSS 10
+#define RFBUSY 7
+#define NRESET 9
+#define LED1 8
+#define DIO1 3
+
+#define LORA_DEVICE DEVICE_SX1280                //we need to define the device we are using  
+
+//LoRa Modem Parameters
+#define Frequency 2445000000                     //frequency of transmissions
+#define Offset 0                                 //offset frequency for calibration purposes  
+#define Bandwidth LORA_BW_0400                   //LoRa bandwidth
+#define SpreadingFactor LORA_SF7                 //LoRa spreading factor
+#define CodeRate LORA_CR_4_5                     //LoRa coding rate
+
+#define TXpower  10                              //power for transmissions in dBm
+
+#define packet_delay 1000                        //mS delay between packets