Init fork from Stuart Robinson's repo

examples/SX128x_examples/Basics/52_FLRC_Transmitter/Settings.h

@@ -0,0 +1,31 @@
+/*******************************************************************************************************
+  Programs for Arduino - Copyright of the author Stuart Robinson - 29/09/21
+
+  This program is supplied as is, it is up to the user of the program to decide if the program is
+  suitable for the intended purpose and free from errors.
+*******************************************************************************************************/
+
+//*******  Setup hardware pin definitions here ! ***************
+
+//These are the pin definitions for one of my own boards, the Easy Pro Mini,
+//be sure to change the definitions to match your own setup.
+
+#define NSS 10
+#define RFBUSY 7
+#define NRESET 9
+#define LED1 8
+#define DIO1 3
+
+#define LORA_DEVICE DEVICE_SX1280                         //we need to define the device we are using  
+
+//FLRC Modem Parameters
+const uint32_t Frequency = 2445000000;                    //frequency of transmissions
+const int32_t Offset = 0;                                 //offset frequency for calibration purposes
+
+const uint8_t BandwidthBitRate = FLRC_BR_1_300_BW_1_2;    //FLRC bandwidth and bit rate, 1.3Mbs
+const uint8_t CodingRate = FLRC_CR_1_0;                   //FLRC coding rate
+const uint8_t BT = RADIO_MOD_SHAPING_BT_1_0;              //FLRC BT
+const uint32_t Syncword = 0x01234567;                     //FLRC uses syncword
+
+const int8_t TXpower  = 0;                                //power for transmissions in dBm
+const uint16_t packet_delay = 1000;                       //mS delay between packets