Init fork from Stuart Robinson's repo

examples/SX128x_examples/RemoteControl/21_On_Off_Transmitter/Settings.h

@@ -0,0 +1,42 @@
+/*******************************************************************************************************
+  Programs for Arduino - Copyright of the author Stuart Robinson - 19/03/20
+
+  This program is supplied as is, it is up to the user of the program to decide if the program is
+  suitable for the intended purpose and free from errors.
+*******************************************************************************************************/
+
+
+//*******  Setup hardware pin definitions here ! ***************
+
+//These are the pin definitions for one of my own boards, the Easy Pro Mini,
+//be sure to change the definitions to match your own setup. 
+
+const int8_t NSS = 10;                          //select on LoRa device
+const int8_t NRESET = 9;                        //reset on LoRa device
+const int8_t RFBUSY = 7;                        //RF busy on LoRa device 
+const int8_t DIO1 = 3;                          //DIO1 on LoRa device, used for RX and TX done
+
+const int8_t LED1 = 8;                          //On board LED, logic high is on
+
+#define LORA_DEVICE DEVICE_SX1280               //this is the device we are using
+
+const int8_t SWITCH0 = 2;
+const int8_t SWITCH1 = 4;
+const int8_t SWITCH2 = A3;
+const int8_t SWITCH3 = A2;
+
+const uint32_t TXIdentity = 1234554321;         //define an identity number, the receiver must use the same number
+//range is 0 to 4294967296
+
+
+
+//*******  Setup LoRa Test Parameters Here ! ***************
+
+//LoRa Modem Parameters
+#define Frequency 2445000000                     //frequency of transmissions
+#define Offset 0                                 //offset frequency for calibration purposes  
+#define Bandwidth LORA_BW_0400                   //LoRa bandwidth
+#define SpreadingFactor LORA_SF7                 //LoRa spreading factor
+#define CodeRate LORA_CR_4_5                     //LoRa coding rate
+
+#define TXpower  10                              //power for transmissions in dBm