hasanabs/SX128X-LoRa
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Init fork from Stuart Robinson's repo

Browse Source
This commit is contained in:
Hasan Albinsaid
2024-10-03 14:30:13 +03:00
commit 9395706524
201 changed files with 45709 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

37
examples/SX128x_examples/Tracker/24_GPS_Tracker_Receiver/Settings.h Normal file
View File

@ -0,0 +1,37 @@
/*******************************************************************************************************
Programs for Arduino - Copyright of the author Stuart Robinson - 22/03/20
This program is supplied as is, it is up to the user of the program to decide if the program is
suitable for the intended purpose and free from errors.
*******************************************************************************************************/
/*******************************************************************************************************
Program Operation -
Serial monitor baud rate is set at 9600.
*******************************************************************************************************/
//******* Setup hardware pin definitions here ! ***************
//These are the pin definitions for one of my own boards, the Easy Pro Mini,
//be sure to change the definitions to match your own setup.
#define NSS 10 //select on LoRa device
#define NRESET 9 //reset on LoRa device
#define RFBUSY 7 //SX128X busy pin
#define DIO1 3 //DIO1 on LoRa device, used for RX and TX done
#define LED1 8 //On board LED, high for on
#define BUZZER -1 //Buzzer if fitted, high for on. Set to -1 if not used
#define LORA_DEVICE DEVICE_SX1280 //this is the device we are using
//******* Setup LoRa Test Parameters Here ! ***************
//LoRa Modem Parameters
const uint32_t Frequency = 2445000000; //frequency of transmissions
const int32_t Offset = 0; //offset frequency for calibration purposes
const uint8_t Bandwidth = LORA_BW_0200; //LoRa bandwidth
const uint8_t SpreadingFactor = LORA_SF12; //LoRa spreading factor
const uint8_t CodeRate = LORA_CR_4_5; //LoRa coding rate