35 lines
1.7 KiB
C
35 lines
1.7 KiB
C
/*******************************************************************************************************
|
|
Programs for Arduino - Copyright of the author Stuart Robinson - 06/02/20
|
|
|
|
This program is supplied as is, it is up to the user of the program to decide if the program is
|
|
suitable for the intended purpose and free from errors.
|
|
*******************************************************************************************************/
|
|
|
|
//******* Setup hardware pin definitions here ! ***************
|
|
|
|
//These are the pin definitions for one of my own boards, the Easy Pro Mini,
|
|
//be sure to change the definitions to match your own setup.
|
|
|
|
#define NSS 10
|
|
#define RFBUSY 7
|
|
#define NRESET 9
|
|
#define LED1 8
|
|
#define DIO1 3
|
|
#define RX_EN -1 //pin for RX enable, used on some SX1280 devices, set to -1 if not used
|
|
#define TX_EN -1 //pin for TX enable, used on some SX1280 devices, set to -1 if not used
|
|
#define BUZZER -1 //pin for BUZZER, set to -1 if not used
|
|
|
|
|
|
#define LORA_DEVICE DEVICE_SX1280 //we need to define the device we are using
|
|
|
|
//LoRa Modem Parameters
|
|
const uint32_t Frequency = 2445000000; //frequency of transmissions
|
|
const int32_t Offset = 0; //offset frequency for calibration purposes
|
|
const uint8_t Bandwidth = LORA_BW_0400; //LoRa bandwidth
|
|
const uint8_t SpreadingFactor = LORA_SF7; //LoRa spreading factor
|
|
const uint8_t CodeRate = LORA_CR_4_5; //LoRa coding rate
|
|
|
|
const int8_t TXpower = 10; //Power for transmissions in dBm
|
|
|
|
const uint16_t packet_delay = 1000; //mS delay between packets
|