hasanabs/SX128X-LoRa
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Init fork from Stuart Robinson's repo

Browse Source
This commit is contained in:
Hasan Albinsaid
2024-10-03 14:30:13 +03:00
commit 9395706524
201 changed files with 45709 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

174
examples/SX128x_examples/Basics/3_LoRa_Transmitter/3_LoRa_Transmitter.ino Normal file
View File

@ -0,0 +1,174 @@
/*******************************************************************************************************
Programs for Arduino - Copyright of the author Stuart Robinson - 06/02/20
This program is supplied as is, it is up to the user of the program to decide if the program is
suitable for the intended purpose and free from errors.
*******************************************************************************************************/
/*******************************************************************************************************
Program Operation - This is a simple LoRa test transmitter. A packet containing ASCII text is sent
according to the frequency and LoRa settings specified in the 'Settings.h' file. The pins to access
the lora device need to be defined in the 'Settings.h' file also.
The details of the packet sent and any errors are shown on the Serial Monitor, together with the transmit
power used, the packet length and the CRC of the packet. The matching receive program, '4_LoRa_Receive'
can be used to check the packets are being sent correctly, the frequency and LoRa settings (in Settings.h)
must be the same for the Transmit and Receive program. Sample Serial Monitor output;
10dBm Packet> {packet contents*} BytesSent,23 CRC,DAAB TransmitTime,54mS PacketsSent,1
Serial monitor baud rate is set at 9600
*******************************************************************************************************/
#include <SPI.h> //the SX128X device is SPI based so load the SPI library
#include <SX128XLT.h> //include the appropriate library
#include "Settings.h" //include the setiings file, frequencies, LoRa settings etc
SX128XLT LT; //create a library class instance called LT
uint8_t TXPacketL;
uint32_t TXPacketCount, startmS, endmS;
uint8_t buff[] = "Hello World 1234567890";
void loop()
{
Serial.print(TXpower); //print the transmit power defined
Serial.print(F("dBm "));
Serial.print(F("Packet> "));
Serial.flush();
TXPacketL = sizeof(buff); //set TXPacketL to length of array
buff[TXPacketL - 1] = '*'; //replace null character at buffer end so its visible on reciver
LT.printASCIIPacket(buff, TXPacketL); //print the buffer (the sent packet) as ASCII
digitalWrite(LED1, HIGH);
startmS = millis(); //start transmit timer
if (LT.transmit(buff, TXPacketL, 10000, TXpower, WAIT_TX)) //will return packet length sent if OK, otherwise 0 if transmit, timeout 10 seconds
{
endmS = millis(); //packet sent, note end time
TXPacketCount++;
packet_is_OK();
}
else
{
packet_is_Error(); //transmit packet returned 0, there was an error
}
digitalWrite(LED1, LOW);
Serial.println();
delay(packet_delay); //have a delay between packets
}
void packet_is_OK()
{
//if here packet has been sent OK
uint16_t localCRC;
Serial.print(F(" BytesSent,"));
Serial.print(TXPacketL); //print transmitted packet length
localCRC = LT.CRCCCITT(buff, TXPacketL, 0xFFFF);
Serial.print(F(" CRC,"));
Serial.print(localCRC, HEX); //print CRC of sent packet
Serial.print(F(" TransmitTime,"));
Serial.print(endmS - startmS); //print transmit time of packet
Serial.print(F("mS"));
Serial.print(F(" PacketsSent,"));
Serial.print(TXPacketCount); //print total of packets sent OK
}
void packet_is_Error()
{
//if here there was an error transmitting packet
uint16_t IRQStatus;
IRQStatus = LT.readIrqStatus(); //read the the interrupt register
Serial.print(F(" SendError,"));
Serial.print(F("Length,"));
Serial.print(TXPacketL); //print transmitted packet length
Serial.print(F(",IRQreg,"));
Serial.print(IRQStatus, HEX); //print IRQ status
LT.printIrqStatus(); //prints the text of which IRQs set
}
void led_Flash(uint16_t flashes, uint16_t delaymS)
{
uint16_t index;
for (index = 1; index <= flashes; index++)
{
digitalWrite(LED1, HIGH);
delay(delaymS);
digitalWrite(LED1, LOW);
delay(delaymS);
}
}
void setup()
{
pinMode(LED1, OUTPUT); //setup pin as output for indicator LED
led_Flash(2, 125); //two quick LED flashes to indicate program start
Serial.begin(9600);
Serial.println();
Serial.println(F("3_LoRa_Transmitter Starting"));
SPI.begin();
//SPI beginTranscation is normally part of library routines, but if it is disabled in library
//a single instance is needed here, so uncomment the program line below
//SPI.beginTransaction(SPISettings(8000000, MSBFIRST, SPI_MODE0));
//setup hardware pins used by device, then check if device is found
if (LT.begin(NSS, NRESET, RFBUSY, DIO1, RX_EN, TX_EN, LORA_DEVICE))
{
Serial.println(F("LoRa Device found"));
led_Flash(2, 125); //two further quick LED flashes to indicate device found
delay(1000);
}
else
{
Serial.println(F("No device responding"));
while (1)
{
led_Flash(50, 50); //long fast speed LED flash indicates device error
}
}
//The function call list below shows the complete setup for the LoRa device using the information defined in the
//Settings.h file.
//The 'Setup LoRa device' list below can be replaced with a single function call;
//LT.setupLoRa(Frequency, Offset, SpreadingFactor, Bandwidth, CodeRate);
//***************************************************************************************************
//Setup LoRa device
//***************************************************************************************************
LT.setMode(MODE_STDBY_RC);
LT.setRegulatorMode(USE_LDO);
LT.setPacketType(PACKET_TYPE_LORA);
LT.setRfFrequency(Frequency, Offset);
LT.setBufferBaseAddress(0, 0);
LT.setModulationParams(SpreadingFactor, Bandwidth, CodeRate);
LT.setPacketParams(12, LORA_PACKET_VARIABLE_LENGTH, 255, LORA_CRC_ON, LORA_IQ_NORMAL, 0, 0);
LT.setDioIrqParams(IRQ_RADIO_ALL, (IRQ_TX_DONE + IRQ_RX_TX_TIMEOUT), 0, 0);
LT.setHighSensitivity();
//***************************************************************************************************
Serial.println();
LT.printModemSettings(); //reads and prints the configured LoRa settings, useful check
Serial.println();
LT.printOperatingSettings(); //reads and prints the configured operating settings, useful check
Serial.println();
Serial.println();
LT.printRegisters(0x900, 0x9FF); //print contents of device registers
Serial.println();
Serial.println();
Serial.print(F("Transmitter ready"));
Serial.println();
}

34
examples/SX128x_examples/Basics/3_LoRa_Transmitter/Settings.h Normal file
View File

@ -0,0 +1,34 @@
/*******************************************************************************************************
Programs for Arduino - Copyright of the author Stuart Robinson - 06/02/20
This program is supplied as is, it is up to the user of the program to decide if the program is
suitable for the intended purpose and free from errors.
*******************************************************************************************************/
//******* Setup hardware pin definitions here ! ***************
//These are the pin definitions for one of my own boards, the Easy Pro Mini,
//be sure to change the definitions to match your own setup.
#define NSS 10
#define RFBUSY 7
#define NRESET 9
#define LED1 8
#define DIO1 3
#define RX_EN -1 //pin for RX enable, used on some SX1280 devices, set to -1 if not used
#define TX_EN -1 //pin for TX enable, used on some SX1280 devices, set to -1 if not used
#define BUZZER -1 //pin for BUZZER, set to -1 if not used
#define LORA_DEVICE DEVICE_SX1280 //we need to define the device we are using
//LoRa Modem Parameters
const uint32_t Frequency = 2445000000; //frequency of transmissions
const int32_t Offset = 0; //offset frequency for calibration purposes
const uint8_t Bandwidth = LORA_BW_0400; //LoRa bandwidth
const uint8_t SpreadingFactor = LORA_SF7; //LoRa spreading factor
const uint8_t CodeRate = LORA_CR_4_5; //LoRa coding rate
const int8_t TXpower = 10; //Power for transmissions in dBm
const uint16_t packet_delay = 1000; //mS delay between packets